When the DEV001 Icon is selected, the right portion of the window will change to display the Device Setup screen for DEV001.įrom the PLC Protocol field, click on the down arrow and select the Allen-Bradley EtherNet/IP Client (MicroLogix 1100) selection. From this window, click on the DEV001 selection on the tree to the left of the window as shown below. The Panel Manager window opens by default displaying Panel Settings. To access the Panel Manager from the C-more Programming Software, from the Main Menu select Setup. The drop-down menu shown below opens.įrom the Setup drop-down menu, select the Panel Manager selection. If communication errors persist, power cycle the C-more panel, THEN the PLC. Power cycle the PLC, THEN the C-more panel.
HACER CONEXION MODBUS POLL TO PLC VERIFICATION
Ensure that the PLC port settings are correct by verification with that PLC’s programming software. If your network is returning communication errors, test the basic network setup by transferring a new C-more project with Panel Manager settings that match the PLC port settings and a single Numeric Display object addressed to N7:0. Troubleshooting the PLC to Panel Connection
Leave all remaining settings as default.C-more needs a static IP Address to connect to. For the BOOTP Enable option, click on the checkbox to deselect it.For the Subnet Mask, enter the same Subnet Mask as set in the C-more Panel Manager.For the IP Address field, this is the IP Address that you enter in the C-more Panel Manager.From this configuration window, make the following field selections and inputs:.From the Channel Configuration window shown below, choose the Channel 1 tab.
In RSLogix 500 choose Channel Configuration in the left navigation window.To Setup the RSLogix 500 for this PLC, follow these steps: The C-more panel is the master when communicating with an Allen-Bradley PLC. The following information applies for Allen-Bradley MicroLogix 1100 & 1400 PLCs compatible with C-more Panels using EtherNet/IP (Client) Protocol. Allen-Bradley MicroLogix 11 EtherNet/IP (Client) Protocol Setup
0 kommentar(er)
